ROKTOOLS
![]()
Antimagnetic Outside Micrometer Non Magnetic 0-100mm
The Micrometer can be used in magnetic area without Any Bias of measuring result, Due to use Stainless Steel, Brone, Ceramic Material
Range: 0-25mm 25-50mm 50-75mm 75-100mm
Resolution: 0.01mm
Mateiral:
Frame: Stainless steel.
Tips of Spindle: Ceramics
Anvil: Ceramics
Sleeve: Stainless Steel
Rachet: Copper
Accuracy; 0-25mm 0.006mm
0.00mA~300.0A Clamp Meter Leakage Meter Distortion Rate
Features:
-Wide frequency, can test current in the frequency range of 40Hz~1kHz
-Double-layer shielding technology, high accuracy, strong anti-interference ability and 10uA solution
-With Flashlight
-Equipped with harmonic analysis function, 21 times (above 10mA)
-Bluetooth communication
-Filter function, Filter open: 40Hz~70Hz; Filter close: 40Hz~1kHz.
Specification:
| Power Supply | DC9V, Alkaline dry battery (6LR61 9V) |
| LCD Size | 43mm×38mm; display area: 36.5mm×29mm |
| LCD Backlight | Yes |
| Measurement Range | 0.00mA~300A |
| Solution | 10uA |
| Measurement Accuracy | 0.00mA~999mA ±1.5%rdg±5dgt |
| 1.00A~300A ±1.5%rdg±5dgt | |
| 300A~599A ±2.0%rdg±5dgt | |
| 600A~1199A ±2.5%rdg±5dgt | |
| 1200A~2000A ±2.5%rdg±5dgt | |
| Clamp Jaw Size | Φ40mm |
| Meter Size | 192mm×96mm×40mm |
| Weight | About 256g (include battery); total weight 470g(include accessory) |
| Flashlight | Yes |
| Filter Function | Filter open: 40Hz~70Hz; Filter close: 40Hz~1kHz |
| Harmonic Analysis | 21 times (above 10mA) |
| Distortion Rate | Yes (above 10mA) |
| Max/Min Value | Yes |
| Average Value | Yes |
| Data Hold | Yes |
| Memory | 2000 groups (storage through APP) |
| Overflow Display | Exceed measure range overflow function: “OL”symbol display |
| Bluetooth Communication | Yes, can test or view the test result on mobile after install the App |
| Automatic Shutdown | 5 Minutes after power on, the meter shut down automatically without any operation to reduce battery consumption. |
| Battery Level | 4-cell battery display |
| Sampling Rate | 2 times/second |
| Working Current | 20mA (turn on flashlight 40mA) |
| Line Voltage | Line testing below AC600V |
| Insulating Strength | AC 3700V/rms(between the core and outside shell) |
| Suitable Safety Standard | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
| Working Condition | -10℃~50℃; below 80%RH |
| Storage Condition | -20℃~60℃; below 70 %RH |
40mm CT Clamp Digital Clamp Meter Leakage Current Tester
The iron core of meter adopts slope film alloy technology and double-layer shielding technology, almost unaffected by the external magnetic field, ensuring high precision, high stability and high reliability of uninterrupted measurement all year, which is widely used in fields of electricity, communication, meteorology, railway, oil field, construction, metrology, scientific research and teaching unit, industrial and mining enterprise, etc.
Mini Clamp Leakage Current Meter with peak hold, data hold, data storage and other functions.
Features:
A essential tool for electrical safety testing.
Double-layer shielding technology, high accuracy, strong anti-interference ability and 10uA solution
Peak hold function
Memory function.
Specification:
| Power Supply | Alkaline dry battery 7# 2 PCS |
| Display Mode | 4 digits LCD display |
| LCD Size | 35mm×21.5mm; display area: 32mm×15mm |
| Measurement Range | 0.00mA~300.0A |
| solution | 10uA |
| Measurement Accuracy | 0~60A: ±1.5%rdg±5dgt |
| 60A~300A: ±2%rdg±5dgt | |
| Clamp Jaw Size | Φ40mm |
| Meter Size | 180mm×72mm×32mm |
| Weight | Meter: about 200g(include battery); total weight: about 0.31kg(include accessory) |
| Test Mode | Clamp CT, integration method |
| Sampling Mode | about 2 times/second |
| Frequency | 50Hz, 60Hz Automatic identification |
| Shift Gear | Fully automatic shift |
| Line Voltage | Line measurement below DC 600V |
| Memory | 99 groups, flicker to display ”FULL” symbol indicate storage full |
| Peak Hold | Peak capture and hold function, long press HOLD key and not release can display peak value in measurement. |
| Data Hold | Data hold function: “DH”symbol display |
| Overflow Display | Exceed measure range overflow function: “OL”symbol display |
| Auto Shut Down | 5 Minutes after power on, the meter shut down automatically without any operation to reduce battery consumption |
| Battery Voltage | While battery voltage decrease to about 2.8V,low battery voltage symbol display, and remind to replace the battery. |
| Working Current | 5mA |
| Insulating Strength | AC2kV/rms(between the core and outside shell) |
| Suitable Safety Standard | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
| Working Temperature & Humidity | 0℃~40℃; below 80%RH |
| Storage Temperature & Humidity | -10℃~60℃; below 70%RH |
Car AC/DC Current Clamp Meter Leakage Current Tester
also known as car leakage current clamp meter, car dark current clamp meter, car charging current tester, etc. which is used for quick detection of automotive leakage current and power consumption current, and it can quickly find faults such as broken wiring harnesses, electrical leakage, line boarding, etc.and measure the starting current of motor and charging current of generator. The meter adopt with Hall induction technology and digital integration technology, non-contact measurement, no need to disconnect the circuit line, fast, safe and reliable. The meter has characteristics of small size, high precision, strong anti-interference ability, automatic shift, which is widely used in automobile maintenance, automobile factory inspection, automobile parts production inspection, telecom machine room current inspection, electric power maintenance, meteorology, oil field inspection, etc
Features:
| Power Supply | Zn-Mn dry battery 6F22 9V |
| Display Mode | 4 digits LCD display |
| LCD Size | 35mm×21.5mm; display area: 32mm×15mm |
| Measurement Method | Clamp CT, Non-contact measurement |
| Measurement Range | 0mA~60.0A AC/DC |
| Solution | 1mA AC/DC |
| Accuracy | ±2%rdg±5dgt(23℃±5℃, below 75%rh) |
| Clamp Jaw Size | 16mm×18mm |
| Sampling Rate | 2 times/second |
| Polar Indication | Automatic identification when testing current, display “-” symbol |
| Wire Position | The tested wire in the center of the clamp jaw |
| Shift Gear | Fully automatic shift |
| Line Voltage | Line measurement below 600V |
| USB Interface | storage data can be uploaded to compute, save and print. |
| Memory | 99 groups, flicker to display “FULL”symbol indicate storage full |
| Data Hold | Data hold function: “DH”symbol display |
| Overflow Display | Exceed measure range overflow function: “OL A”symbol display |
| Auto Shut Down | 5 Minutes after power on, the meter shut down automatically without any operation to reduce battery consumption |
| Battery Voltage | While battery voltage decrease to about 7.2V,low battery voltage symbol display, and remind to replace the battery. |
| Meter Size | 215mm×61mm×32mm |
| Weight | 220g(include battery) |
| Working Current | Max 10mA |
| Insulating Strength | AC 3700V/rms(between the core and outside shell) |
| Suitable Safety Standard | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
| Working Temperature & Humidity | -10℃~50℃; below 80%rh |
| Storage Temperature & Humidity | -10℃~60℃; below 70%rh |
1.0V~600V 3 Phase Power Quality Analyzer
Functions
1.Real time waveform display (3 channels voltage/4 channels current).
2.True effective value of voltage and current.
3.Phasor diagram display.
4.Measurement of harmonics in each phase, up to 50 harmonics.
5.The bar chart displays the harmonic content of each phase's current and voltage.
6.Total harmonic distortion (THD).
7.The active/reactive/apparent power value and total value of each phase.
8.Voltage, current and power trend chart.
9.The active/reactive/apparent power value and total value of each phase.
10.Measurement of three-phase imbalance (voltage and current).
11.Record waveform and parameter.
12.Screenshot save.
13.Touch screen operation.
14.Short term voltage flicker.
15.Starting current and surge current monitoring.
16.USB communication interface and computer upper communication.
17.The wiring method of the instrument and the type of power grid can be set.
18.Different current clamp and voltage test ratio can be set.
Features
1.Conduct a comprehensive analysis and diagnosis of all electrical parameters such as voltage, current, power, electrical energy, harmonics, phase, etc.
2.4 current clamps are available for selection, suitable for various site.
3.4 channels current and voltage measurement, while capturing and recording electrical parameter and waveform.
4.Large LCD color screen display with high resolution.
5.Bilingual operation interface in Chinese and English.
6.TF memory card: 8G.
7.USB communication interface.
Measurement Accuracy
| Measurement | Measurement Range | Display Solution | Max. Error Within The Reference Range |
| Frequency | 40Hz~70Hz | 0.001Hz | ±(0.03)Hz |
| True Effective Value Of Voltage | 2V~600V | Min. Solution 0.001V | ±(0.5%Fs) |
| True Effective Value Of Current | 10mA~6000A | Min. Solution 0.001A | ±(0.5%Fs) |
| Active Power | 0.0000W~3600kW | Min. Solution 0.001W | ±(1%rdg 3dgt); Cosφ≥0.8 |
| ±(1.5%rdg 10dgt); 0.2≤Cosφ<0.8 | |||
| Reactive Power | 0.0000VAR~3600kVAR | Min. Solution 0.001VAR | ±(1%rdg 3dgt); Sinφ≥0.5 |
| ±(1.5%rdg 10dgt); 0.2≤Sinφ<0.5 | |||
| Apparent Power | 0.0000VA~3600kVA | Min. Solution 0.001VA | ±(1%rdg 3dgt) |
| Power Factor | -1.000~1.000 | 0.001 | ±(1.5%rdg 3dgt); Cosφ≥0.5 |
| ±(1.5%rdg 10dgt); 0.2≤Cosφ<0.5 | |||
| Phase Angle | 0°~360° | 0.001° | ±(2°) |
| Voltage Harmonic Ratio Includes 1~50 times (Vrms>50V) | 0.0%~99.9% | 0.001% | (1~20 times)±(1%rdg 5dgt) (21~30 times)±(1%rdg 10dgt) (31~50 times)±(1%rdg 15dgt) |
| Voltage Harmonic Angle (Vrms>50V) | 0°~360° | 0.001° | ±(3°)harmonic 1~25 times |
| ±(10°)harmonic 26~50 times | |||
| Current Harmonic Ratio Includes 1~50 times (Arms>I range÷100) | 0.0%~99.9% | 0.001% | (1~20 times)±(1%rdg 5dgt) (21~30 times)±(1%rdg 10dgt) (31~50 times)±(1%rdg 15dgt) |
| Current Harmonic Angle (Arms>I range÷100) | 0°~360° | 0.001° | ±(3°)harmonic 1~25 times ±(10°)harmonic 26~50 times |
| Total Harmonic Rate (THD or THD-F)≤50 | 0.0%~99.9% | 0.001% | ±(1%rdg 10dgt) |
| Distortion Factor (DF or THD-R)≤50 | 0.0%~99.9% | 0.001% | ±(1%rdg 10dgt) |
| Three-phase Imbalance | 0.0%~100% | 0.01% | ±(1%) |
2.General Specifications
| Power Supply | Rechargeable lithium battery pack 7.4V 5200mAh, external battery charger. |
| Display Mode | 5 inch true-color touch screen |
| Working Current | About 490mA |
| Current Clamp Specifications (Optional) | 015B Current clamp: 17mm×18mm; 042B Current clamp: Φ40mm; 050B Current clamp: Φ50mm; 200F Flexible current clamp: Φ200mm; |
| Number Of Channels | 3 channels voltage, 4 channels current. |
| Voltage Measurement Range | 2V~600V |
| Current Measurement Range | 015B Current clamp: 10mA~10.0A; 042B Current clamp: 0.1A~100A; 050B Current clamp: 1A~1000A; 200F Current clamp: 10A~6000A; |
| Frequency Measurement Range | 40Hz~70Hz |
| Harmonic | Yes,2~51 times. |
| Total Harmonic Distortion | Yes,2~51 times, each phase. |
| Three-phase Imbalance | Yes |
| Communication Interface | USB |
| TF Memory Card | 8G |
| Battery Level Indication | The battery symbol shows the battery level, and when the battery level is lower, the instrument will automatically shut down. |
| Automatic Shutdown | When the recording function is turned on, the instrument does not automatically shut down. |
| If the recording function is not turned on, it can be automatically turned off after 15 minutes, 30 minutes, and 60 minutes according to the setting time. | |
| Meter Size | 210mm×129mm×68mm |
| Weight | About 7.5kg (include package and accessory) |
| Input Impedance | The input impedance of the test voltage: 1MΩ. |
| Withstand Voltage | The sine wave AC voltage of 3700V/50Hz withstand between the instrument circuit and the housing for 1 minute. |
| Insulation | The distance between the instrument circuit and the protective case ≥ 10M Ω. |
| Suitable Safety Standard | IEC 61010 1000V Cat III / 600V CAT IV, IEC61010-031, IEC61326, Pollution Level 2. |
| Working Temperature & Humidity | -10℃~40℃; below 80%RH. |
| Store Temperature & Humidity | -10℃~60℃; below 70%RH. |
Current Clamp (optional)
| Current Clamp Model | Picture Of Current Clamp | Current True RMS Value | Measurement Range | The Maximum Error Of The True RMS Value Of The Current | Maximum Error Of Phase Angle φ |
| 015B CT Size: 17mm×18mm | 10mA~99mA | 10.0A | ±(1% 3dgt) | ±(3°),Arms≥20mA | |
| 100mA~10.0A | ±(1% 3dgt) | ±(1.5°) | |||
| 042B Ф40mm | 0.10A~0.99A | 100A | ±(1% 3dgt) | ±(1.5°) | |
| 1.00A~100A | ±(1% 3dgt) | ±(1.5°) | |||
| 050B CT Size: Ф50mm | 1.0A~9.9A | 1000A | ±(2% 3dgt) | ±(3°) | |
| 10.0A~1000A | ±(2% 3dgt) | ±(3°) | |||
CT Size: Ф200mm | 10A~99A | 6000A | ±(1 %rdg 3dgt) | ±(3°) | |
| 100A~6000A | ±(1 %rdg 3dgt) | ±(3°) |
60mm Diameter Large Disc Micrometer Gear Tooth Thickness Micrometer
Features:
Painted frame
Strong cast steel frame
Large Anvil and spindle
Spindle diameter: 8mm
Diameter of disc: 60mm
Mechnical type
DIN Standard High Accuracy
Specification:
| Order NO | Range | Resolution | Diameter of Disk |
| DM-170801 | 0-25mm | 0.01mm | 60mm |
| DM-170802 | 25-50mm | 0.01mm | 60mm |
| DM-170803 | 50-75mm | 0.01mm | 60mm |
| DM-170804 | 75-100mm | 0.01mm | 60mm |
Non magnetic Outside Micrometer 0-25mm Antimagnetic Mcirometer
The tips are made of material free from magnetism, For completely free from magnetism, please choose DM-44332 Series:
Features:
- antimagnetic
- with ratchet friction thimble
- with hardened special measuring faces
- scale chrome finished
- spindle Ø 6,5 mm, thread pitch 0,5 mm
- scale 0,01 mm
- accuracy DIN 863
- with standard
- in case/box
mm
| Order NO | Range | L | h |
| DM-44335-25 | 0-25mm | 32 | 24 |
| DM-44335-50 | 25-50mm | 57 | 32 |
| DM-44335-75 | 50-75mm | 72 | 45 |
| DM-44335-100 | 75-100mm | 105 | 57 |
25-3000um Wet Mil Gauge Hexagonal WFT Gauge
Features:
It is a great tool to measure the coating thickness of paint, varnish, etc
60-600mm Crankshaft Deflection Gauge Detecting Bends
DI-6202 60-500mm
Features:
- Works standard
- To test crankshaft deflection
- Centring points 90° hardened
- Delivered in wooden box incl. dial gauge
- The balance block is mounted on the back of dial indicator to keep the dial indicator facing up
- Pendulum weight for positioning dial gauge horizontally
Specification
Heavy Duty Digital Taper Gauge Slot Gauge 50-60mm
Note: Hold the caliper horizontally when unscrew it, in case the beam drops on the ground and damage it.
The Heavy duty type digital taper gauge is widely used in power station to measure the gap or slot width of turbomachine and other machine. It is also referes to as digital taper slot gauge. More Thicker, more stronger.
Features:
- Heavy duty type, more thicker than 70801 types gauge.
- Highly precision ground surface
- Handened Stainless steel
- Packed in wooden box
Specification:
| Order No | Range | Accuracy | Resolution |
| TAWG-72301 | 0.2-10mm | /-0.03mm | 0.01mm |
| TAWG-72302 | 10-20mm | /-0.03mm | 0.01mm |
| TAWG-72303 | 20-30mm | /-0.03mm | 0.01mm |
| TAWG-72304 | 30-40mm | /-0.03mm | 0.01mm |
| TAWG-72305 | 40-50mm | /-0.03mm | 0.01mm |
| TAWG-72306 | 50-60mm | /-0.04mm | 0.01mm |
Heavy Duty Digital Taper Gauge 0.2-10mm Slot Gauge
Note: Hold the caliper horizontally when unscrew it, in case the beam drops on the ground and damage it.
The Heavy duty type digital taper gauge is widely used in power station to measure the gap or slot width of turbomachine and other machine. It is also referes to as digital taper slot gauge. More Thicker, more stronger.
Features:
- Heavy duty type, more thicker than 70801 types gauge.
- Highly precision ground surface
- Handened Stainless steel
- Packed in wooden box
Specification:
| Order No | Range | Accuracy | Resolution |
| TAWG-72301 | 0.2-10mm | /-0.03mm | 0.01mm |
| TAWG-72302 | 10-20mm | /-0.03mm | 0.01mm |
| TAWG-72303 | 20-30mm | /-0.03mm | 0.01mm |
| TAWG-72304 | 30-40mm | /-0.03mm | 0.01mm |
0.001° Dual Axis Digital Inclinometer High Precision
The difference between INCL-820 is double axis with two rows display on X and Y axis. With 0.001 degree resolution, the instruments are more sentitive. It is designed for inspector who need monitoring angle control by real time. it is widely used in Aerial Work Platforms industry. Tilt Sensor, Tilt Meter
-Who need inclinometer:
- Cell phone base constructer
- Building constructer.
- Road slope
- Medical Instruments.
- Aircraft manufacturer
- Platform Leveling
- Pitch and Roll Monitoring
- Antenna Positioning
- Vehicle Tilt Monitoring
Features:
-Max accuracy: <0.003°
-Repeatability: 0.003°
-Angle resolution: 0.001°
-Maximum measuring range: 90°
-With changeable alarm
-Data storeage
-Absolute/Relative measurement can switch
-Both sides and bottom can measure
-Double benchmark strong magnet installation
-Working Temperature : -10°～ 70℃
-Auto-angle interleaved compensation function
-Auto temperature drift compensation
-Zero at any position.
-Built-in rechargable industry batteries
-Night vision fours colors screen
-IP54 protection class
-°/mm/m Dual units switch function
-Filter frequency optional
-Three kinds of measurement mode selectable (radian, angle, mm)
-Metal shell
-With Software
-With hold function
-Specification:
| Angle Measuring range | INCL-2002 0:±15 ° ; | INCL-2002:±30 ° ; | ° |
| MM measuring range | 267 | 577 | mm |
| Meausring axis | Two axis | Two axis | |
| The highest meausring accuracy | <0.005 (Full measuring range) | <0.01 (Full measuring range) | ° |
| Angle Measuring resolution | 0.001 | 0.001 | ° |
| MM measuring accuracy | 0.1 | 0.2 | mm |
| Three measurement mode selectable | radian, angle, mm measuring can be selected | ||
| MM measuring res | 0.02 | mm | |
| LCD | 64 true colors night vision display screen | ||
| LCD visible area size | L57.6*W43.2 | mm | |
| Working temperature | -10°~ 70℃ | °/℃ | |
| Working humidity | 85 | %RH | |
| Power supply | 3.7VCharging Lithium battery | V | |
| Ideal charging time | 3~4 | h | |
| Battery sustainable charging times | 11 | h | |
| Equipped with PC software | VC software | ||
| Data output signal | USB1.1 | ||
| Connect plug in | Standard 5Pin USB connector | ||
| Shock resistance | 10g@11ms, 3Times/Axis(half sinusoid) | g | |
| Shock impact | 10grms, 10～100Hz | g | |
| Weight | 300 | g | |
| Waterproof grade | IP54 | ||
| Material | Metal | ||
| Size | L107*W75*H27.1mm | mm | |
Stainless Steel Machinist Square 100*70mm Engineering Square with Base
Features:
With a wide base giving stable support for free standing applications
Quality stainless steel square
Standard:DIN875
Grade 0
Specification:
Order No | Size(L*W) | Squareness(α) | Squareness（β） | a | b | c | h |
PESQ-10210 | 50*40 | 6 | 6 | 13 | 13 | 13 | 4 |
PESQ-10220 | 75*50 | 6 | 7 | 15 | 15 | 15 | 4 |
PESQ-10230 | 100*70 | 7 | 7 | 20 | 20 | 20 | 5 |
PESQ-10240 | 150*100 | 7 | 8 | 30 | 30 | 30 | 6 |
PESQ-10250 | 200*130 | 8 | 9 | 34 | 34 | 34 | 7 |
PESQ-10260 | 250*165 | 9 | 10 | 35 | 35 | 35 | 7 |
PESQ-10270 | 300*200 | 10 | 11 | 40 | 40 | 40 | 8 |
DIN 875 Engineering Square with Base 50*40mm Machinist Square
Features:
With a wide base giving stable support for free standing applications
Quality stainless steel square
Standard:DIN875
Grade 0
Specification:
Order No | Size(L*W) | Squareness(α) | Squareness（β） | a | b | c | h |
PESQ-10210 | 50*40 | 6 | 6 | 13 | 13 | 13 | 4 |
PESQ-10220 | 75*50 | 6 | 7 | 15 | 15 | 15 | 4 |
PESQ-10230 | 100*70 | 7 | 7 | 20 | 20 | 20 | 5 |
PESQ-10240 | 150*100 | 7 | 8 | 30 | 30 | 30 | 6 |
PESQ-10250 | 200*130 | 8 | 9 | 34 | 34 | 34 | 7 |
PESQ-10260 | 250*165 | 9 | 10 | 35 | 35 | 35 | 7 |
PESQ-10270 | 300*200 | 10 | 11 | 40 | 40 | 40 | 8 |
1000-2000mm Tubular Inside Micrometer With Extension Rods
Features:
- Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
- Resolution: 0.01mm
- Carbide measuring faces
- Supplied with setting standards
- Travel of micrometer head: 50mm
Specification:
| Order No | Range | Extension Rods | travel of Head |
| IM-221802 | 1000-2000mm | 50mm,100mm(2pcs),200mm,500mm | 50mm |
| IM-221803 | 1000-3000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm | 50mm |
| IM-221804 | 1000-4000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(2pcs) | 50mm |
| IM-221805 | 1000-5000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(3pcs) | 50mm |
1000-4000mm Tubular Inside Micrometer With Extension Rods
Features:
- Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
- Resolution: 0.01mm
- Carbide measuring faces
- Supplied with setting standards
- Travel of micrometer head: 50mm
Specification:
| Order No | Range | Extension Rods | travel of Head |
| IM-221802 | 1000-2000mm | 50mm,100mm(2pcs),200mm,500mm | 50mm |
| IM-221803 | 1000-3000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm | 50mm |
| IM-221804 | 1000-4000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(2pcs) | 50mm |
| IM-221805 | 1000-5000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(3pcs) | 50mm |
1000-3000mm Tubular Inside Micrometer With Extension Rods
Features:
- Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
- Resolution: 0.01mm
- Carbide measuring faces
- Supplied with setting standards
- Travel of micrometer head: 50mm
Specification:
| Order No | Range | Extension Rods | travel of Head |
| IM-221802 | 1000-2000mm | 50mm,100mm(2pcs),200mm,500mm | 50mm |
| IM-221803 | 1000-3000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm | 50mm |
| IM-221804 | 1000-4000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(2pcs) | 50mm |
| IM-221805 | 1000-5000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(3pcs) | 50mm |
1000-2000mm Tubular Inside Micrometer With Extension Rods
Features:
- Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
- Resolution: 0.01mm
- Carbide measuring faces
- Supplied with setting standards
- Travel of micrometer head: 50mm
Specification:
| Order No | Range | Extension Rods | travel of Head |
| IM-221802 | 1000-2000mm | 50mm,100mm(2pcs),200mm,500mm | 50mm |
| IM-221803 | 1000-3000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm | 50mm |
| IM-221804 | 1000-4000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(2pcs) | 50mm |
| IM-221805 | 1000-5000mm | 50mm,100mm(2pcs),200mm,500mm 1000mm(3pcs) | 50mm |
150-4000mm Tubular Inside Micrometer Extension Rods and Standard
Features:
-Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head
-Lightweight tubular steel construction
-Chrome frame
-Laser engraved graduations Metric
-Resolution:
-0.01mm/Metric
-Packed with wooden box with foam for long time shipping by sea or by air.
-The contact can be flat or spheric depends on customers request.
-OEM is welcomed for this type. ROK International can turn your thinking into drawing and real micrometer.
-Inside micrometer Range: 100-1200mm, 100-1400mm, 150-3000mm, 150-4000mm, 150-5000mm, 150-6000mm
-Low Cost, Affordable
Specification:
| Order NO. | Range | Rods | Resolution |
|---|---|---|---|
| IM-220201 | 100-1000mm | 25,50,100(2pcs)200,400 | 0.01mm |
| IM-220202 | 100-1200mm | 25,50,100(2pcs),200(2pcs),400 | 0.01mm |
| IM-220203 | 100-1400mm | 25,50,100(2psc),200,400(2pcs) | 0.01mm |
| IM-220204 | 100-1500mm | 25,50,100,200(2pcs),400(2pcs) | 0.01mm |
| IM-220205 | 100-2100mm | 25,50,100,200,400(4pcs) | 0.01mm |
| IM-220206 | 150-2100mm | 25,50,100(2pcs)200,400 | 0.01mm |
| IM-220207 | 1000-2000mm | 25,50,100(2pcs)200,500 | 0.01mm |
| IM-220208 | 1000-3000mm | 25,50,100(2),200,500,1000 | 0.01mm |
| IM-220209 | 150-3000mm | 25,50(2),100,200(2),400(3),1000 | 0.01mm |
| IM-220210 | 150-4000mm | 25,50(2),100,200(2),400(3),1000(2) | 0.01mm |
| IM-220211 | 150-5000mm | 25,50(2),100, 200(2),400(3),1000(3) | 0.01mm |
| IM-220212 | 150-6000mm | 25,50(2),100, 200(2),400(3),1000(4) | 0.01mm |
Note: We reserve the right to change products and specifications at any time without notice. Images may or may not include optional equipment. Subject to ROK final confirmation