ROKTOOLS

Fillet Weld Gauge Convex and Concave Fillet Leg Throat Size MG-11

check for fillet size and concavity

Checks Fillet Leg & Throat Size

Features: 

•  With deburred edges
•  Knurled nut hols set 7 leves together
•  Convex and Concave 
•  Laser marked scale 
•  OEM is welcomed
•  One end marked in inch, the other end marked in Metric. 
•  Come in a pack of seven gauges 

Main Function: 

MEASURES INTERNAL ALIGNMENT Of pipe after fit-up/ alignment, cuts radiographic rejects.

Measures internal misalignment of pipe before and after tacking.

Measurements read in standard one side, and metric on the opposite side.

Measure fit- up gap

Measure bevel on end preparation;

Measure the crown height of welds;

Measure fillet weld size;

Features:

• This welding gauge measures internal alignment of pipe after fit-up/alignment.
• Made of high quality steel, this gauge is durable and not easily scratched.
• Gauge surface is clearly marked by laser which is wear-resisting and ensures a clear reading.
• Small size and light weight, it is convenient to carry and easy to use.
• Widely used for welding inspection of boiler, shipbuilding, bridge, pressure vessel and oil pipeline.

Specifications:

Material: Steel

Measuring Range: 0-4mm

Item Size: 15.3*2cm/6*0.8in

Size150*14mm

Weight: 100g

Packed by pouch

Internal misalignment Range: 0-30mm  Resolution: 1mm

Fit-up gap: 0.7-4mm Resolution: 0.1mm

Package Includes:

1 xGauge

English manual

High Accuracy

Light weight and portable

Range: 10-100um

Meet International standard

Made in China

The gauge can be put into small crack to measure the depth of it with slim tips. 

Features: 

With straight measuring needle

With large LCD display . the data can be read directly

Tips diameter: 1mm

Range: 0-25mm

0.4-6mm   Choose Type A

0.5-10mm Choose Type B

0.5-15mm  Choose Type C

Features:

    Accurately tapered throughout its entire length for quick and convenient measuement.

    Made of Stainless Steel.

    Other specification is available

Specification:

Function: 

-Measures Acute and Obtuse Weld Fillet

-Used in skewed members or members at 90 degrees, and it can replace other sets of gauges to measure fillet or groove welds

-Checking Weld Acute Side

-With Calculator The SKEW weld gage also with a fillet weld calculator,a handy compilation of mathematical relationships between leg length, throats, skew angles and inspection -dimensions

-Checking Weld Obtuse Side

Specification: 

Metric 

1.Angle of the skewed member: 30-90°
2. Theoretical Throat (in Inch): 0-1.2''
3. Leg Size of Fillet (in Inch): 0-1.6''
4. Inspection Dimension (in Inch): 0-1.6''
Inch 1.Angle of the skewed member: 30-90°
2. Theoretical Throat (in Metric): 0-30mm
3. Leg Size of Fillet (in Metric): 0-40mm
4. Inspection Dimension (in Metric): 0-40mm

Features:

- Made of Stainless Steel.

- Prcision ground

- Taper gauge and scale combination.

Product Features:

1 * telescopic inspection mirror

Description:
       These gauges are made of high quality stainless steel, durable and rust-resistant. The taper gage is widely used for measuring inner diameter, hole size, gap size and slot size. It can accurately measure cylindrical bores, helping you to get the correct size for  repair/replacement of wall wart cords, etc. For measuring hole diameters you insert the instrument into the hole until a graduation mark touches both sides of the hole at which point you can read off the hole diameter

Features: 

-Polished surface, laser scale, easier to read

-Forged stainless steel material, good wear resistance

-Taper gauge set is suitable for gap, bore, inner diameter measurement

Specification: 

Accuracy clearance: /-0.08mm

Accuracy Hole 

Range: 10mm

Package: 

2pcs/1-10mm, 1pc/3-10mm, 1pc/4-10mm, 1pc/5-10mm.

Основные характеристики и предел погрешностей шаблона УШС-3 приведены в таблице:

WG-218 is updated from ROK WG-208, These two bridge cam gauge almost the same except pointer.  WG-218 has two pointers on both side.  One can measure from both sides without changing its position.  These gauges are all used in bridge and building construction,  pipe installing, ship inspection or building.

Specification: 
Size(approx.):
Large size: mirror diameter 82mm. can be extended to 760mm
Medium: mirror diameter 55mm. can be extended to 940mm
Small: mirror diameter 32mm. can be extended to 910mm

With LED (battery is not included)


Introduction:
1. The mirror is equipped with LED lights, with light detection, and the 360-degree rotating lamp head is suitable for small space operation.

2. The rotary joint has no dead angle, the telescopic rod can be adjusted, and the length can be adjusted freely.

3. Rubber non-slip handle, non-slip design, comfortable to use.

4  The tool can detect engine oil leakage, see the water tank leaking, look at the internal structure of the headlights, 

     and see the oil on the evaporator surface.
5. Instructions for use: Open the cover, turn left to open the battery cover,

     pull out the insulation sheet of the insulated battery, close the cover and open the switch

6. Alloy steel material, high quality, high-definition mirror, high-definition reflective objects. Use range mechanical repair, home and auto parts repair.

List:

inspection mirror *1(S. M, L)

• Angle of preparation
• Excess weld metal
• Depth of undercut
• Depth of pitting
• Weld throat size