ROKTOOLS
Adjustable Fillet Weld Gauge Measures weld throat thickness
adjustable fillet weld gauge used an offset arm which slides at a 45º angle to make fillet weld length measurement. Simply adjust the arm until it touches the toe of the vertical leg. The gage is calibrated to 32nds. Four screws hold the offset arm in position for future adjustments.
Function:
Measures any fillet weld from 1/8" to 1" to 1/32"
used an offset arm which slides at a 45º angle to make fillet weld length measurement
Features:
Stainless Steel
Measure the special fillet
Small in size
Size: 2-1/4 x 3"
Four screws hold the offset arm
Material: metal
Package Contents:
1*Conical Taper Gauge
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Order No | Range | Length | Resolution |
WG-50421 | 1-6.5mm | 50mm | 0.1mm |
WG-50422 | 3-15mm | 122mm | 0.1mm |
WG-50423 | 15-30mm | 165mm | 0.1mm |
WG-50424 | 30-45mm | 165mm | 0.1mm |
eatures:
- Angle of preparation, 0º to 60º
- Excess weld metal (capping size)
- Depth of undercut
- Depth of pitting
- Fillet weld throat size
- Fillet weld length
- Misalignment (High-Low)
- Stainless Steel
- High polished surface
- Laser carved scale
- Packed synthetic leather bag for the convenience of storage and carrying
- NDT instruments
Specification:
- Constituent Part: Main scale ; Slider ; Multifunction Gage
- Measuring range (Please refer to the instruction manual for specific use):
- Undercut / pitting depth : 0-1'' & 0-25 mm
- Seam reinforcement : 0-1'' & 0-25 mm
- Outside Misalignment: 0-1'' & 0-25 mm
- Fillet leg length: 0-1'' & 0-25 mm
- Fillet throat size: 0-3/4'' & 0-20mm
Features
- Measurement plate thickness
- Measurement the height of butt weld bead
- Measurement the fillet weld bead height
- Measurement weldment groove angle
- Measurement weldment gap
- Check leg length
- Checks All Pipe Schedule
- Check Throat Dimensions
- Made of stainless steel
- With locking screw
- Easy to take
- Made of Stainless Steel
- Highly ground surface
- With moveable scale
- With Chain
Specification:
Weight: 0.1KG
Pipe Pit Gauge With Handy Formulas 0 to 1/2 identify the condition of a pipe Welding inspection Tools
The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit.Function:
-For NDT inspector related to any pipe weld
-Serve as a constant guide for judging the condition of pipe, The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit.
-Useful formulas, tables, and data giving O.D
Specification:
Range is 0 to 1/2" in 1/64" & .010 Increments.
Made of stainless steel
Weight: 0..2KG
Vest-pocket size
Packed with pouch
Imperial units
Fillet Weld Gauge Convex and Concave Fillet Leg Throat Size MG-11
check for fillet size and concavity
Checks Fillet Leg & Throat Size
Features:
- With deburred edges
- Knurled nut hols set 7 leves together
- Convex and Concave
- Laser marked scale
- OEM is welcomed
- One end marked in inch, the other end marked in Metric.
- Come in a pack of seven gauges
Main Function:
MEASURES INTERNAL ALIGNMENT Of pipe after fit-up/ alignment, cuts radiographic rejects.
Measures internal misalignment of pipe before and after tacking.
Measurements read in standard one side, and metric on the opposite side.
Measure fit- up gap
Measure bevel on end preparation;
Measure the crown height of welds;
Measure fillet weld size;
Features:
- This welding gauge measures internal alignment of pipe after fit-up/alignment.
- Made of high quality steel, this gauge is durable and not easily scratched.
- Gauge surface is clearly marked by laser which is wear-resisting and ensures a clear reading.
- Small size and light weight, it is convenient to carry and easy to use.
- Widely used for welding inspection of boiler, shipbuilding, bridge, pressure vessel and oil pipeline.
Specifications:
Material: Steel
Measuring Range: 0-4mm
Item Size: 15.3*2cm/6*0.8in
Size150*14mm
Weight: 100g
Packed by pouch
Internal misalignment Range: 0-30mm Resolution: 1mm
Fit-up gap: 0.7-4mm Resolution: 0.1mm
Package Includes:
1 xGauge
PouchEnglish manual
High Accuracy
Light weight and portable
Range: 10-100um
Meet International standard
Made in China
The gauge can be put into small crack to measure the depth of it with slim tips.
Features:
With straight measuring needle
With large LCD display . the data can be read directly
Tips diameter: 1mm
Range: 0-25mm
0.4-6mm Choose Type A
0.5-10mm Choose Type B
0.5-15mm Choose Type C
Features:
Accurately tapered throughout its entire length for quick and convenient measuement.
Made of Stainless Steel.
Other specification is available
Specification:
Code | Range | Resolution ( mm/in ) | Length | Width | Accuracy(mm) |
WG-50401 | 0.4-6mm | 0.05mm | 164 | 12.5 | /-0.04mm |
WG-50402 | 0.5-10mm | 0.05mm | 220 | 10 | /-0.07mm |
WG-50403 | 0.5-15mm | 0.05mm | 184 | 12.5 | /-0.08mm |
Description:
Brand new and high quality!
Dual ball joint positions mirror at any angle
Corrosion-resistant chrome plated shaft
Twin bright white LEDs illuminate latent areas for ultimate visibility
Comfortable handle with soft nonslip rubber grip
The lamp holder can rotate 360 degrees, the pole is telescopic, maximum up to 65cm
Item type: Telescopic inspection mirror
Material: Plastic, Aluminum
Color: As pictures.
Light source type: LED
Voltage: 3-3.2v
Power: 0.5W, lumen L:10lm
Waterproof level: IPX-3
Product size(approx.): length 73cm/28.74in, folded: 38cm/14.96in,
mirror size : 50*80mm/1.97 * 3.15in
Power supply: 2 * CR2032 button batteries
Brightness adjustment: no
Switch type: push type
Scope of application: Automobile Inspection
Packing list:
1x Telescopic inspection mirror
Универсальный шаблон сварщика УШС-2 (катетомер) предназначен для контроля катетов угловых швов сварных соединений в диапазоне 4-14 мм при проведении визуального и измерительного контроля. Контроль УШС-2 производится ступенчатым методом, до выявления минимального зазора. Шаблон УШС-2 состоит из 3 лепестков с катетами 4 и 14 мм; 8 и 10 мм; 6 и 12 мм. Каждая пластинка лепесток имеет 2 выемки определенной величины катета, при этом, каждая из таких выемок промаркирована в соответствии с величиной радиуса катета шва. Контроль катета сварного шва производится путем последовательного соприкосновения (подбора) лепестков с соединенными сваркой деталями. Размер считается установленным, если длинная сторона лепестка и перемычка между катетами лепестка, прилегают к детали без видимого зазора, а зазор между дугами лепестка и шва является минимальным. При несовпадении ни с одной ступенью размеров в указанном диапазоне, значение катета шва определяется опытным путем.
Function:
-Measures Acute and Obtuse Weld Fillet
-Used in skewed members or members at 90 degrees, and it can replace other sets of gauges to measure fillet or groove welds
-Checking Weld Acute Side
-With Calculator The SKEW weld gage also with a fillet weld calculator,a handy compilation of mathematical relationships between leg length, throats, skew angles and inspection -dimensions
-Checking Weld Obtuse Side
Specification:
Metric
1.Angle of the skewed member: 30-90°
2. Theoretical Throat (in Inch): 0-1.2''
3. Leg Size of Fillet (in Inch): 0-1.6''
4. Inspection Dimension (in Inch): 0-1.6''
Inch 1.Angle of the skewed member: 30-90°
2. Theoretical Throat (in Metric): 0-30mm
3. Leg Size of Fillet (in Metric): 0-40mm
4. Inspection Dimension (in Metric): 0-40mm
Taper Gauge: 1-15mm
Metal ruler: 0-15mm
Features:
- Made of Stainless Steel.
- Prcision ground
- Taper gauge and scale combination.
Product Features:
2. For Welding Inspection, car repair inspection
3. Stainless steel, sturdy and durable.
4. Suitable for the shipbuilding, automotive and testing industries.
5. Foldable, easy to take
Specification
1. Color: silver
2. Material: steel
Packing list:
1 * telescopic inspection mirror
Description:
These gauges are made of high quality stainless steel, durable and rust-resistant. The taper gage is widely used for measuring inner diameter, hole size, gap size and slot size. It can accurately measure cylindrical bores, helping you to get the correct size for repair/replacement of wall wart cords, etc. For measuring hole diameters you insert the instrument into the hole until a graduation mark touches both sides of the hole at which point you can read off the hole diameter
Features:
-Polished surface, laser scale, easier to read
-Forged stainless steel material, good wear resistance
-Taper gauge set is suitable for gap, bore, inner diameter measurement
Specification:
Accuracy clearance: /-0.08mm
Accuracy Hole
Range: 10mm
Package:
2pcs/1-10mm, 1pc/3-10mm, 1pc/4-10mm, 1pc/5-10mm.
Основные характеристики и предел погрешностей шаблона УШС-3 приведены в таблице:
Контролируемый параметр | Диапазон измерений | Допустимая погрешность |
Углы разделки (скоса кромок) | 0 -45° | ±2,5° |
Смещение кромки | 0 - 15 мм | ±0,5 мм |
Размер притупления и ширины шва (линейка) | 0 - 50 мм | ±0,15 мм |
Высота усиления стыкового шва | 0 - 5 мм | ±0,5 мм |
Глубина вогнутости шва | 0 - 15 мм | ±0,5 мм |
Высота выпуклости шва | 0 - 5 мм | ±0,5 мм |
Подрезы корня шва | 0 - 15 мм | ±0,5 мм |
Глубина дефектов шва | 0 - 15 мм | ±0,5 мм |
Высота дефектов шва | 0 - 5 мм | ±0,5 мм |
Размеры зазоров | 1 - 4 мм | ±0,25 мм |
Диаметр электродов | 1/1,2/2/2,5/3/3,25/4/5 | до 3 мм 0,1 мм от 3 до 3,25 мм 0,1 мм более 3,25 мм 0,3 мм |
Type :Welding Inspection Gauge
Manufacturer: ROK International Industry Co., Limited
System:Metric
Function:
Measure the crown height
colour:Silver
Material: steel
Package Contents:
1 * Weld gauge
Only the above package content, other products are not included.